Basic Info
Model No.: 6000 Series
Product Description
Grade name: 1050,1060,1070,1100,2014,2017,3003,3105,5083,6061,6082,7075,8011,and etc.
Temper: HO, H14, H112, T3, T4, T6, T651, T6511 Available Finishes ² Mill Finished ² Polished/Chromed/Brushed/Wire/Matte ² Powder Coated ² Anodized Colored ² Electrophoresis ² Spray Painted ² Wood Transfer ² Wood Grain 3D Painted ² Fluorocarbon Powder Coated
Our Standards Raw Material Permitted Difference in Size | Gaps in Surface | Curvature | Twist | Angle | Length | |||||||
≤0.15mm for any width of 25mm | ≤0.3mm for any length of 300mm | ≤0.017mm per meter of length | ±1º | +15mm for nominal length ≤ 6m | ||||||||
Mechanics Performance | HW | Tensile Strength | Yield Strength | Elongation | ||||||||
≥8 | ≥160N/mm² | ≥110N/mm² | 8% | |||||||||
Chemical Composition | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti | ||||
0.2-0.6 | 0.45-0.9 | ≤0.35 | ≤0.1 | ≤0.1 | c0.1 | ≤0.1 | ≤0.1 | |||||
Quality of the Anodized Film |
| Average Thickness | Min. Partial Thickness | CASS Test | Full Alkali Test | Sanding Test Abrasion Coefficient | Hole Sealing | Extrinsic Feature |
| ≤300mg/dm² | 1.no burns by electricity nor drops of film that affect performance 2.partical burns and drops within 80mm from both ends are allowed | ||||||
AA10 | ≥10μm | ≥8μm | ≥Grade 9 | ≥50S | ≥300g/μm | |||
AA15 | ≥15μm | ≥12μm | ≥Grade 9 | ≥75S | ≥300g/μm |
Contact us if you need more details on Aluminum Bar. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminum Rods、Aluminium Bars. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : Aluminum > Aluminum Bars
